Description
Display Type: Digital/Analogue
Polarisation Index (PI) and Dielectric Absorption Ratio (DAR) functions as well as test results storage
Included accessories: Red/black silicone lead set with clips, protective rubber boot
Designed to meet the safety requirements for use on CAT IV 600 V
Insulation/Continuity Tester
SPECIFICATIONS: Nominal Test Voltages:50 V, 100 V, 250 V, 500 V, 1000 V ; Insulation Resistance Range:2 to 200 GΩ; Analogue Range:1 GΩ full scale; Short Circuit Current:2 mA + 0% – 50%; Leakage Current Range:10 µA to 2000 µA; Leakage Current Accuracy:10% rdg. ± 3 dgt.; Voltage Display:3% rdg. ± 3 dgt. ± 0.5% of rated voltage; Polarisation Index (PI):10 min/1 minute ratio; Dielectric Absorption Ratio (DAR):60 sec/30 sec ratio; Continuity Range:0.01 to 99.9 Ω (0 to 100 Ω on analogue scale); Accuracy:± 2% rdg. ± 2 dgt. (0 to 100 Ω); Test Current:205 mA (± 5 mA) (0.01 to 9.99 Ω); 20 mA (± 1 mA) (10.0 to 99.9 Ω); Buzzer: Variable limit, 1 Ω, 2 Ω, 5 Ω, 10 Ω, 20 Ω; Resistance Range:0.01 to 1000 kΩ (0 to 1 MΩ on analogue scale); Accuracy:± 3% rdg. ± 2 dgt. up to 50 kΩ, then ± 5% rdg. ± 2 dgt.;
Open Circuit Voltage:5 V ± 1 V; Short Circuit Current:1.5 mA ± 0.2 mA; Voltage Range:0 to 600 VDC; Accuracy:± 2% rdg. ± 2 dgt.; Frequency Range:40 to 450 Hz; Accuracy:± 0.5% rdg. ± 1 dgt.; Capacitance Range:100 pF to 10 µF; Accuracy: ± 5.0% rdg. ± 2 dgt.;
Storage Capacity: >1000 test results; Power Supply: 5 x 1.5 V, Alkaline batteries, NiMH rechargeable cells may be used; Battery Life: 2200 insulation tests with duty cycle of 5 sec ON /55 sec OFF @ 1000 V into 1 MΩ; Dimensions: 220 x 92 x 50 mm (8.66 x 3.63 x 1.97″); Weight: 590 g (20.73 oz)
